Intrusion Detection System (IDS):
A system that tries to identify attempts to hack or break into a
computer system or to misuse it. IDSs may monitor packets passing over
the network, monitor system files, monitor log files, or set up
deception systems that attempt to trap hackers.
Computer systems have become more vulnerable to intrusions than ever. Intrusion Detection is a security technology that allows not only the detection of attacks, but
also attempts to provide notification of new attacks unforeseen by other
components. Intrusion detection is an important component of a security system,
and it complements other security technologies.
>>How does an IDS work?
While there are several types of IDSs, the most common types work the same.
They analyze network traffic and log files for certain patterns. What kind of
patterns you may ask? While a firewall will continually block a hacker from connecting to a network, most firewalls never alert an administrator.
The administrator may notice if he/she checks the access log of the firewall, but
that could be weeks or even months after the attack. This is where an IDS comes
into play. The attempts to pass through the firewall are logged, and IDS will analyze its log. At some point in the log there will be a large number of request-reject
entries. An IDS will flag the events and alert an administrator. The administrator
can then see what is happening right after or even while the attacks are still taking place. This gives an administrator the advantage of being able to analyze the techniques being used, source of attacks, and methods used by the hacker.
>>Following are the types of intrusion detection systems :-
1)Host-Based Intrusion Detection System (HIDS): Host-based intrusion detection
systems or HIDS are installed as agents on a host. These intrusion detection systems can look into system and application log files to detect any intruder activity.
2)Network-Based Intrusion Detection System (NIDS): These IDSs detect attacks by capturing and analyzing network packets. Listening on a network segment or
switch, one network-based IDS can monitor the network traffic affecting multiple
hosts that are connected to the network segment, thereby protecting those hosts. Network-based IDSs often consist of a set of single-purpose sensors or hosts placed
at various points in a network. These units monitor network traffic, performing local analysis of that traffic and reporting attacks to a central management console.
>>Some important topics comes under intrusion detection are as follows :-
1)Signatures: Signature is the pattern that you look for inside a data packet. A signature is used to detect one or multiple types of attacks. For example, the
presence of “scripts/iisadmin” in a packet going to your web server may indicate
an intruder activity. Signatures may be present in different parts of a data packet depending upon the nature of the attack.
2)Alerts: Alerts are any sort of user notification of an intruder activity. When an IDS detects an intruder, it has to inform security administrator about this using alerts.
Alerts may be in the form of pop-up windows, logging to a console, sending e-mail and so on. Alerts are also stored in log files or databases where they can be viewed later on by security experts.
3)Logs: The log messages are usually saved in file.Log messages can be saved
either in text or binary format.
4)False Alarms: False alarms are alerts generated due to an indication that is not
an intruder activity. For example, misconfigured internal hosts may sometimes broadcast messages that trigger a rule resulting in generation of a false alert.
Some routers, like Linksys home routers, generate lots of UPnP related alerts. To
avoid false alarms, you have to modify and tune different default rules. In some
cases you may need to disable some of the rules to avoid false alarms.
5)Sensor: The machine on which an intrusion detection system is running is also called the sensor in the literature because it is used to “sense” the network.
>>SNORT:
Snort is a very flexible network intrusion detection system that has a large set of pre-configured rules. Snort also allows you to write your own rule set. There are several mailing lists on the internet where people share new snort rules that can counter the latest attacks.
Snort is a modern security application that can perform the following three functions :
* It can serve as a packet sniffer.
* It can work as a packet logger.
* It can work as a Network-Based Intrusion Detection System (NIDS).
Smooth-Sec is a lightweight and fully-ready IDS/IPS (Intrusion Detection/Prevention System) Linux distribution based on Debian 7 (wheezy), available for 32 and 64 bit architecture. The distribution includes the latest version of Snorby, Snort, Suricata, PulledPork and Pigsty. An easy setup process allows to deploy a complete IDS/IPS System within minutes, even for security beginners with minimal Linux experience.
Download:
32-Bit – smoothsec-3.0-i386.iso
64-Bit – smoothsec-3.0-amd64.iso
Computer systems have become more vulnerable to intrusions than ever. Intrusion Detection is a security technology that allows not only the detection of attacks, but
also attempts to provide notification of new attacks unforeseen by other
components. Intrusion detection is an important component of a security system,
and it complements other security technologies.
>>How does an IDS work?
While there are several types of IDSs, the most common types work the same.
They analyze network traffic and log files for certain patterns. What kind of
patterns you may ask? While a firewall will continually block a hacker from connecting to a network, most firewalls never alert an administrator.
The administrator may notice if he/she checks the access log of the firewall, but
that could be weeks or even months after the attack. This is where an IDS comes
into play. The attempts to pass through the firewall are logged, and IDS will analyze its log. At some point in the log there will be a large number of request-reject
entries. An IDS will flag the events and alert an administrator. The administrator
can then see what is happening right after or even while the attacks are still taking place. This gives an administrator the advantage of being able to analyze the techniques being used, source of attacks, and methods used by the hacker.
>>Following are the types of intrusion detection systems :-
1)Host-Based Intrusion Detection System (HIDS): Host-based intrusion detection
systems or HIDS are installed as agents on a host. These intrusion detection systems can look into system and application log files to detect any intruder activity.
2)Network-Based Intrusion Detection System (NIDS): These IDSs detect attacks by capturing and analyzing network packets. Listening on a network segment or
switch, one network-based IDS can monitor the network traffic affecting multiple
hosts that are connected to the network segment, thereby protecting those hosts. Network-based IDSs often consist of a set of single-purpose sensors or hosts placed
at various points in a network. These units monitor network traffic, performing local analysis of that traffic and reporting attacks to a central management console.
>>Some important topics comes under intrusion detection are as follows :-
1)Signatures: Signature is the pattern that you look for inside a data packet. A signature is used to detect one or multiple types of attacks. For example, the
presence of “scripts/iisadmin” in a packet going to your web server may indicate
an intruder activity. Signatures may be present in different parts of a data packet depending upon the nature of the attack.
2)Alerts: Alerts are any sort of user notification of an intruder activity. When an IDS detects an intruder, it has to inform security administrator about this using alerts.
Alerts may be in the form of pop-up windows, logging to a console, sending e-mail and so on. Alerts are also stored in log files or databases where they can be viewed later on by security experts.
3)Logs: The log messages are usually saved in file.Log messages can be saved
either in text or binary format.
4)False Alarms: False alarms are alerts generated due to an indication that is not
an intruder activity. For example, misconfigured internal hosts may sometimes broadcast messages that trigger a rule resulting in generation of a false alert.
Some routers, like Linksys home routers, generate lots of UPnP related alerts. To
avoid false alarms, you have to modify and tune different default rules. In some
cases you may need to disable some of the rules to avoid false alarms.
5)Sensor: The machine on which an intrusion detection system is running is also called the sensor in the literature because it is used to “sense” the network.
>>SNORT:
Snort is a very flexible network intrusion detection system that has a large set of pre-configured rules. Snort also allows you to write your own rule set. There are several mailing lists on the internet where people share new snort rules that can counter the latest attacks.
Snort is a modern security application that can perform the following three functions :
* It can serve as a packet sniffer.
* It can work as a packet logger.
* It can work as a Network-Based Intrusion Detection System (NIDS).
TOOLS:
Smooth-Sec 3.0 Intrusion Detection SystemSmooth-Sec is a lightweight and fully-ready IDS/IPS (Intrusion Detection/Prevention System) Linux distribution based on Debian 7 (wheezy), available for 32 and 64 bit architecture. The distribution includes the latest version of Snorby, Snort, Suricata, PulledPork and Pigsty. An easy setup process allows to deploy a complete IDS/IPS System within minutes, even for security beginners with minimal Linux experience.
- Debian 7 Wheezy based
- 32 and 64 bit iso available. Snorby V 2.6.2
- Snort V 2.9.4.6
- Suricata V 1.4.3
- Pigsty V 0.1.0
- PulledPork V 0.6.1
Download:
32-Bit – smoothsec-3.0-i386.iso
64-Bit – smoothsec-3.0-amd64.iso
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.